Arduino Uno Programacion Ejemplos May 2026

The Arduino Uno is a microcontroller board based on the ATmega328P microcontroller. It’s a small, programmable device that can read sensors, control actuators, and communicate with other devices. The Arduino Uno is widely used in robotics, automation, and IoT projects, and is a great platform for learning programming and electronics.

The Arduino Uno can be programmed using the Arduino Integrated Development Environment (IDE). The Arduino IDE is a free software that allows you to write, compile, and upload code to the Arduino board. The language used to program the Arduino Uno is based on C/C++ and is similar to other programming languages.

const int buttonPin = 2; const int ledPin = 13; void setup() { pinMode(buttonPin, INPUT); pinMode(ledPin, OUTPUT); } void loop() { int buttonState = digitalRead(buttonPin); if (buttonState == HIGH) { digitalWrite(ledPin, HIGH); } else { digitalWrite(ledPin, LOW); } } This program controls a servo motor connected to pin 9 and moves it from 0 to 180 degrees.

Here are some programming examples to get you started with the Arduino Uno: One of the simplest programs you can write for the Arduino Uno is a blinking LED. This program uses the digitalWrite() function to turn an LED on and off.

Getting Started with Arduino Uno: A Comprehensive Guide to Programming Examples**

const int motorPin1 = 9; const int motorPin2 = 10; void setup() { pinMode(motorPin1, OUTPUT); pinMode(motorPin2, OUTPUT); } void loop() { digitalWrite(motorPin1, HIGH); digitalWrite(motorPin2, LOW); delay(1000); digitalWrite(motorPin1, LOW); digitalWrite(motorPin2, HIGH); delay(1000); }

const int tempPin = A0; void setup() { Serial.begin(9600); } void loop() { int tempValue = analogRead(tempPin); float temperature = (tempValue * 5.0 / 1024.0 - 0.5) * 100; Serial.print("Temperature: "); Serial.print(temperature); Serial.println("C"); delay(1000); } This program controls a DC motor connected to pin 9 and pin 10 using an L298N motor driver.

const int ledPin = 13; void setup() { pinMode(ledPin, OUTPUT); } void loop() { digitalWrite(ledPin, HIGH); delay(1000); digitalWrite(ledPin, LOW); delay(1000); } This program reads the state of a button connected to digital pin 2 and turns an LED on pin 13 on and off.

Arduino Uno Programacion Ejemplos May 2026

KP7500-34

Наименование: KP7500-34

ЭКТ: УТ-00021688

Бренд: Dynex

Конфигурация: Alloying

Тип: Тиристор силовой

ITSM, kA: 8.0

VDRM, V: 3400

VTM, V: 2.65

VT0, V: 0.98

IT(AV), A: 530

Rth(j-c), K/W: 0.035

Корпус: KP7

Диаметр, мм: 47

Статус: M

Упаковка: 1

Кол-во: –

Цена, руб. (включая НДС): По запросу

Заказать

Arduino Uno Programacion Ejemplos May 2026

Arduino Uno Programacion Ejemplos May 2026

Спасибо за Ваше сообщение!