Niksindian 22.03.01 Nargis | Look Alike Beautiful...
The resemblance between the two is nothing short of remarkable. From her facial structure and features to her overall demeanor, it’s clear that this individual has been blessed with a unique gift. Her eyes, in particular, seem to sparkle with a similar intensity and depth, making it easy to see why many are convinced that she’s Nargis’ long-lost twin.
As we continue to follow her journey, it’s clear that this talented individual has a bright future ahead of her. Whether or not she chooses to pursue a career in the entertainment industry, one thing is certain: her remarkable resemblance to Nargis has already brought joy and excitement to countless fans around the world. NiksIndian 22.03.01 Nargis Look Alike Beautiful...
Unveiling the Doppelganger: NiksIndian 22.03.01 Nargis Look Alike Stuns** The resemblance between the two is nothing short
In the vast and diverse world of social media, it’s not uncommon to come across individuals who bear striking resemblances to celebrities. However, when it comes to lookalikes, some are more convincing than others. Recently, a stunning individual has taken the internet by storm, leaving many in awe of her uncanny resemblance to the legendary Bollywood actress, Nargis. As we continue to follow her journey, it’s
Meet the NiksIndian 22.03.01 Nargis Look Alike, a beautiful and talented individual who has been making waves online with her striking features and captivating presence. While she may not be a household name just yet, her likeness to the iconic actress has garnered significant attention, and it’s easy to see why.
While not much is known about the NiksIndian 22.03.01 lookalike’s personal life, her online presence suggests that she’s a confident and charismatic individual. With a keen sense of style and a passion for sharing her talents with the world, she’s quickly built a loyal following across various social media platforms.
Fig. 1.
Groove configuration of the dissimilar metal joint between HMn steel and STS 316L
Fig. 2.
Location of test specimens
Fig. 3.
Dissimilar metal joints for welding deformation measurement: (a) before welding, (b) after welding
Fig. 4.
Stress-strain curves of the DMWs using various welding fillers
Fig. 5.
Hardness profiles for various locations in the DMWs: (a) cap region, (b) root region
Fig. 6.
Transverse-weld specimens of DN fractured after bending test
Fig. 7.
Angular deformation for the DMW: (a) extracted section profile before welding, (b) extracted section profile after welding.
Fig. 8.
Microstructure of the fusion zone for various DSWs: (a) DM, (b) DS, (c) DN
Fig. 9.
Microstructure of the specimen DM for various locations in HAZ: (a) macro-view of the DMW, (b) near fusion line at the cap region of STS 316L side, (c) near fusion line at the root region of STS 316L side, (d) base metal of STS 316L, (e) near fusion line at the cap region of HMn side, (f) near fusion line at the root region of HMn side, (g) base metal of HMn steel
Fig. 10.
Phase analysis (IPF and phase map) near the fusion line of various DMWs: (a) location for EBSD examination, (b) color index of phase for Fig. 10c, (c) phase analysis for each location; ① DM: Weld–HAZ of HMn side, ② DM: Weld–HAZ of STS 316L side, ③ DS: Weld–HAZ of HMn side, ④ DS: Weld–HAZ of STS 316L side, ⑤ DN: Weld–HAZ of HMn side, ⑥ DN: Weld–HAZ of STS 316L side, (the red and white lines denote the fusion line) (d) phase fraction of Fig. 10c, (e) phase index for location ⑤ (Fig. 10c) to confirm the formation of hexagonal Fe3C, (f) phase index for location ⑤ (Fig. 10c) to confirm no formation of ε–martensite
Fig. 11.
Microstructural prediction of dissimilar welds for various welding fillers [34]
Fig. 12.
Fractured surface of the specimen DN after the bending test: (a) fractured surface (x300), (b) enlarged fractured surface (x1500) at the red-square location in Fig. 12a, (c) EDS analysis of Nb precipitates at the red arrows in Fig. 12b, (d) the cross-section(x5000) of DN root weld, (e) EDS analysis in the locations ¨ç–¨é in Fig. 12d
Fig. 13.
Mapping of Nb solutes in the specimen DN: (a) macro view of the transverse DN, (b) Nb distribution at cap weld depicted in , (c) Nb distribution at root weld depicted in
Table 1.
Chemical composition of base materials (wt. %)
|
C |
Si |
Mn |
Ni |
Cr |
Mo |
| HMn steel |
0.42 |
0.26 |
24.2 |
0.33 |
3.61 |
0.006 |
| STS 316L |
0.012 |
0.49 |
0.84 |
10.1 |
16.1 |
2.09 |
Table 2.
Chemical composition of filler metals (wt. %)
| AWS Class No. |
C |
Si |
Mn |
Nb |
Ni |
Cr |
Mo |
Fe |
| ERFeMn-C(HMn steel) |
0.39 |
0.42 |
22.71 |
- |
2.49 |
2.94 |
1.51 |
Bal. |
| ER309LMo(STS 309LMo) |
0.02 |
0.42 |
1.70 |
- |
13.7 |
23.3 |
2.1 |
Bal. |
| ERNiCrMo-3(Inconel 625) |
0.01 |
0.021 |
0.01 |
3.39 |
64.73 |
22.45 |
8.37 |
0.33 |
Table 3.
Welding parameters for dissimilar metal welding
| DMWs |
Filler Metal |
Area |
Max. Inter-pass Temp. (°C) |
Current (A) |
Voltage (V) |
Travel Speed (cm/min.) |
Heat Input (kJ/mm) |
| DM |
HMn steel |
Root |
48 |
67 |
8.9 |
2.4 |
1.49 |
| Fill |
115 |
132–202 |
9.3–14.0 |
9.4–18.0 |
0.72–1.70 |
| Cap |
92 |
180–181 |
13.0 |
8.8–11.5 |
1.23–1.59 |
| DS |
STS 309LMo |
Root |
39 |
68 |
8.6 |
2.5 |
1.38 |
| Fill |
120 |
130–205 |
9.1–13.5 |
8.4–15.0 |
0.76–1.89 |
| Cap |
84 |
180–181 |
12.0–13.5 |
9.5–12.2 |
1.06–1.36 |
| DN |
Inconel 625 |
Root |
20 |
77 |
8.8 |
2.9 |
1.41 |
| Fill |
146 |
131–201 |
9.0–12.0 |
9.2–15.6 |
0.74–1.52 |
| Cap |
86 |
180 |
10.5–11.0 |
10.4–10.7 |
1.06–1.13 |
Table 4.
Tensile properties of transverse and all-weld specimens using various welding fillers
| ID |
Transverse tensile test
|
All-weld tensile test
|
| TS (MPa) |
YS (Ϯ1) (MPa) |
TS (MPa) |
YS (Ϯ1) (MPa) |
EL (Ϯ2) (%) |
| DM |
636 |
433 |
771 |
540 |
49 |
| DS |
644 |
433 |
676 |
550 |
42 |
| DN |
629 |
402 |
785 |
543 |
43 |
Table 5.
CVN impact properties for DMWs using various welding fillers
| DMWs |
Absorbed energy (Joule)
|
Lateral expansion (mm)
|
| 1 |
2 |
3 |
Ave. |
1 |
2 |
3 |
Ave. |
| DM |
61 |
60 |
53 |
58 |
1.00 |
1.04 |
1.00 |
1.01 |
| DS |
45 |
56 |
57 |
53 |
0.72 |
0.81 |
0.87 |
0.80 |
| DN |
93 |
95 |
87 |
92 |
1.98 |
1.70 |
1.46 |
1.71 |
Table 6.
Angular deformation for various specimens and locations
| DMWs |
Deformation ratio (%)
|
| Face |
Root |
Ave. |
| DM |
9.3 |
9.4 |
9.3 |
| DS |
8.2 |
8.3 |
8.3 |
| DN |
6.4 |
6.4 |
6.4 |
Table 7.
Typical coefficient of thermal expansion [26,27]
| Fillers |
Range (°C) |
CTE (10-6/°C) |
| HMn |
25‒1000 |
22.7 |
| STS 309LMo |
20‒966 |
19.5 |
| Inconel 625 |
20‒1000 |
17.4 |
